Cutting metal roofing is a crucial part of any roofing project — especially in Wyoming where harsh weather demands precise installation. Whether you’re handling a small residential roof or a large-scale commercial build, knowing how to cut metal roofing sheets and panels the right way ensures a clean, weather-tight fit.

In this guide, Pete’s Builders walks you through the best methods for cutting metal roofing, the tools to use, and how to do it safely — even by hand.

---

🛠️ Tools You’ll Need for Cutting Metal Roofing

When working with metal roofing, always use the right tool for the job. Here’s what our pros recommend:

Cut Type	Best Tool	Use Case
Across corrugated ribs	Profile Nibbler	Punches through ribbed panels
Straight, flat cuts	Double Cut Power Shear	Clean, straight lines
Small notches or trims	Aviation Snips	Detailed or angled cuts
Tab folding for trims	Hand Seamer	Bending trims to match edges

Pro Tip: Always wear gloves and eye protection. Cutting metal produces sharp burrs.

---

📏 How to Cut Metal Roofing Sheets

Most metal roofing sheets used in Wyoming homes and buildings are corrugated or ribbed. Cutting them requires strategy:

Step 1: Mark Your Cuts

Use a straight edge and marker to outline the areas you need to cut. Ensure your measurements are precise.

Step 2: Cut Across the Ribs

Use a profile nibbler to punch through the ribs. This tool is ideal because it doesn’t distort the panel and handles uneven surfaces easily.

Step 3: Cut the Flat Section

Once past the ribs, switch to a double cut shear. It slices cleanly through the flat section of the metal sheet without warping.

---

✂️ How to Cut Metal Roofing by Hand

No power tools? No problem.

• Aviation Snips are great for short cuts, corners, or detailed notching.
• For straight cuts, use long-handled tin snips. Take your time — it’s slower but effective.

🔥 Ideal for small DIY tasks like shed roofing, barn siding, or flashing adjustments.

---

🌧️ How to Cut Corrugated Metal Roofing Safely

Corrugated roofing is popular across Wyoming’s residential and commercial properties. Cutting it requires attention to ridges:

• Mark your cuts clearly on both ridges and valleys
• Use profile nibblers or snips to handle the raised portions
• Always clamp the panel to a solid surface to avoid shifting

Bonus: For large commercial projects, Pete’s Builders uses powered shears to save time and maintain edge integrity.

---

❄️ Weather Matters in Wyoming

Cutting and installing metal roofing in cold or windy weather can be tricky. Here’s what to consider:

• Avoid cutting metal in freezing temperatures – brittle edges can crack
• Clamp your panels securely if working outdoors in wind-prone areas

Whether you’re in Cheyenne, Casper, or rural Wyoming — our team understands local challenges.

---

💼 Residential vs Commercial Cutting Considerations

• Residential Projects: Smaller cuts, more detailed finishes (e.g. chimneys, skylights)
• Commercial Projects: Long straight cuts, bulk panel adjustments, time-efficient tools

Pete’s Builders handles both with precision.

---

🧰 FAQs – Cutting Metal Roofing in Wyoming

Q1: What’s the easiest way to cut metal roofing panels?
Use a double cut shear for long, straight cuts and aviation snips for trimming.

Q2: Can I use a circular saw to cut metal roofing?
Avoid it — it creates sparks, rough edges, and potential damage to coating.

Q3: How many panels will I need for my roof?
Our experts can help you calculate roofing squares. Learn about roofing squares →

Q4: Is there a difference between cutting residential and commercial roofing metal?
Yes — residential needs detailed edgework, commercial needs speed and consistency.

---

📞 Ready for a Roofing Upgrade?

Pete’s Builders offers residential and commercial roofing in Wyoming, including full-service installations, repairs, and expert metal roofing panel cutting.

📍 Serving Cheyenne, Casper, Laramie & surrounding areas
📞 Call us: (307) 215-4977
🔗 Visit our website for free estimates

Let’s build your roof right — clean cuts, strong seams, built to last.

When it comes to protecting your home from the elements, your roofing choice matters. Whether you’re considering a new installation or planning a replacement, Pete’s Builders is here to help homeowners in Wyoming and Nebraska make informed decisions. In this guide, we’ll cover the types of Roofing Shingles, proper nail sizes, bundle estimates, where Roofing shingles are made, and finally, whether metal roofing is a better option.

---

1. What Are the 3 Types of Shingles Used in Roofing?

There are several shingle options available, but these three dominate the residential roofing market:

✨ Asphalt Shingles
The most popular option in America, especially in Wyoming and Nebraska homes is Asphalt Roofing. They’re affordable, available in various colors, and come in three styles:

• 3-tab
• Architectural (dimensional)
• Luxury (designer)

🌳 Wood Shingles
Typically made from cedar, these give homes a natural, rustic look. However, they require more maintenance and aren’t ideal for areas with wildfire risk.

⛰ Slate or Composite Shingles
Slate is elegant and extremely durable, but heavy and expensive. Composite shingles imitate slate but are more affordable and lightweight.

---

2. What Size Roofing Nails for Shingles Should You Use?

The standard recommendation for roofing nails is 1 ¼ inch galvanized steel nails. However, this can vary based on:

• Shingle thickness
• Roof pitch
• Local building codes in Wyoming or Nebraska
• Type of underlayment used

Pete’s Builders uses high-quality fasteners that meet or exceed local standards.

---

3. Where Are Roofing Shingles Made?

Most roofing shingles used in our projects come from major U.S.-based manufacturers:

• GAF – Headquartered in New Jersey
• Owens Corning – Based in Ohio
• CertainTeed – Pennsylvania origin

These companies operate production plants across the Midwest, ensuring easy access and reliable supply in Nebraska and Wyoming.

---

4. How Many Roofing Shingles in a Bundle?

On average:

• 3-tab shingles: ~26 shingles per bundle
• Architectural shingles: ~21–22 shingles per bundle

How many bundles make a roofing square?
A “square” in roofing = 100 square feet of coverage → usually 3 bundles per square.

This makes it easier to estimate your project size and materials when working with a local contractor like Pete’s Builders.

---

5. Is Metal Roofing Better Than Shingles?

It depends on your priorities.

Metal Roofing Pros:

• Lasts 40–70 years
• Energy efficient (reflects heat)
• Fire and weather resistant

Shingle Roofing Pros:

• Lower upfront cost
• Simple to install and repair
• Widely available and visually adaptable

Conclusion: For extreme climates or long-term investment, metal might be ideal. For budget-friendly, beautiful results, shingles remain the top choice in Wyoming & Nebraska.

---

6. Choosing the Right Roofing for Your Home

At Pete’s Builders, we assess:

• Your home structure
• Energy efficiency goals
• Weather conditions
• Budget

We’ll recommend whether shingles or metal will offer better long-term protection and ROI.

---

7. Need a Roofing Quote in Wyoming or Nebraska?

Pete’s Builders offers free consultations and on-site inspections in Cheyenne, Laramie, Casper, Scottsbluff, and North Platte.

🌟 Get expert advice, accurate estimates, and dependable craftsmanship.

Call us today or visit: petesbuilderscommercial.com/

If you’re searching for the best roofing company near me, you’re not alone. Whether you’re dealing with a leaky roof in Cheyenne or planning a full roof replacement in North Platte, choosing the right roofing contractor can make or break your investment. In this guide, we’ll show you how to identify the top-rated roofing professionals in your area—and why Pete’s Builders is a trusted name in Wyoming and Nebraska.

---

🏠 What Makes a Roofing Company the “Best”?

Not all roofers are created equal. Here’s what separates the pros from the rest:

• Proper Licensing & Insurance – Top companies carry valid local/state licenses and liability insurance.
• Manufacturer Certifications – GAF Master Elite or Owens Corning Preferred Contractor status is a green flag.
• Strong Online Presence – A well-reviewed Google Business Profile (with photos and 4.5+ rating) is a must.
• Local Knowledge – Contractors who understand Wyoming’s hail storms or Nebraska’s wind codes bring real value.

👉 Want to verify a roofer? Start with Google Reviews and the Better Business Bureau.

---

🛠️ Best Roofing Repair Company Near Me – What to Expect

Roof repairs are urgent and specialized. A top-rated roofing repair company offers:

• Emergency Response within 24–48 hours
• Storm Damage Repairs including hail, wind, and ice damming
• Flat & Pitched Roof Repairs (EPDM, TPO, asphalt, etc.)
• Leak Detection & Patching

Pete’s Builders offers fast and reliable roof repairs in Cheyenne, Laramie, Scottsbluff, and North Platte—ensuring your home stays protected year-round.

🛎️ Also See: Roof Repairs & Maintenance in Wyoming

---

🔩 Best Metal Roofing Company Near Me – What Sets Them Apart

Metal roofing is growing in popularity for both homes and businesses. But not every roofer can install it properly.

Here’s what the best metal roofing company offers:

• Experience with Standing Seam & Corrugated Panels
• Use of Galvalume, Aluminum, or Steel Products
• Weather-Resistant Installation designed for Midwest hail & high winds
• Energy Efficiency & Longevity Warranties

Pete’s Builders is among the best metal roofing companies in Nebraska—trusted for premium installations in Lincoln, Ogallala, and beyond.

---

⭐ How to Identify the Best Rated Roofing Company

Here’s your quick checklist:

✅ 4.5+ Stars on Google with at least 50 reviews
✅ BBB Accredited with A or A+ rating
✅ Before/After Project Photos
✅ Detailed customer feedback, not just “great job!”

Look for roofing companies that showcase their work, not just say it. Pete’s Builders features dozens of 5-star reviews and project case studies.

---

🧠 What Questions to Ask a Roofing Contractor Before Hiring

1. Are you licensed and insured in Wyoming/Nebraska?
2. How many years of experience do you have in my city?
3. Can I see previous projects similar to mine?
4. Do you offer workmanship warranties?
5. What’s your typical project timeline?

These questions will instantly separate reliable contractors from risky ones.

---

💬 Common Customer Questions Answered

Who is the best roofing company near me?
→ Pete’s Builders is a top choice in Wyoming and Nebraska based on ratings, service range, and reviews.

What is the best roofing company for metal roofs?
→ A company with certified metal roofing installers and local code knowledge—like Pete’s Builders.

Can I get same-day roof repairs?
→ Some repairs can be done same-day depending on weather, damage type, and crew availability.

Do best roofing contractors offer financing?
→ Yes! Pete’s Builders offers flexible financing options for roof replacement and repairs.

---

📍 Why Pete’s Builders Is Considered the Best Roofing Company in Wyoming & Nebraska

✅ Locally Owned & Operated
✅ Residential + Commercial Roofing Experts
✅ Storm Damage & Insurance Claim Help
✅ Trusted in Cheyenne, Lincoln, Scottsbluff, and surrounding areas
✅ 5-Star Rated on Google & BBB Accredited

Whether it’s a residential roof replacement or commercial TPO installation, our experienced crews deliver unmatched craftsmanship.

---

💡 Pro Tips: How to Compare Local Roofing Companies

Feature	What to Look For
License	State-verified with proof
Reviews	4.5+ stars, real customer names
Timeline	Start date within 2–3 weeks
Quotes	Written, itemized, and free
Materials	GAF, Malarkey, or Owens Corning
Communication	Fast response, project manager assigned

🚩 Avoid roofers with no local address, vague answers, or pushy sales tactics.

---

📞 Book a Free Roof Inspection with Pete’s Builders

Ready to work with the best rated roofing company near you?

📍 Serving: Cheyenne, WY | North Platte, NE | Scottsbluff, NE | Laramie, WY
📅 Same-week inspections available
📲 Call: (307) 222-7455 or visit petesbuilderscommercial.com

Your roof deserves the best. Let Pete’s Builders take care of it.